DISC Alto Mixpack Express Portable 350w Powered PA System - Nearly New

Full Description

Ultra-Portable Clean Power With Effects and EQ

The 350 Watt MIXPACK Express is one of three PA systems in the MIXPACK line, along with the 600 Watt MIXPACK and 1000 Watt MIXPACK Pro. Being the lightest and most portable of all MIXPACK PAs has its advantages. There simply isn't an easier, more affordable way to get this much clean power, mixing and Alesis DSP effects in one place. It takes only a few minutes from the time you bring MIXPACK Express into the venue, to the time the gig powers on, and power on it will.

MIXPACK Express comes complete with two 10" speakers and 350 watts of continuous power. All the right connections are present including balanced XLR, balanced/unbalanced TRS and unbalanced RCA so no matter what you need to connect, you're all set. MIXPACK Express also includes two speaker cables in the package so you can get set up in no time. The speakers attach and detach to the amp/mixer module using firm, rugged latches and the entire kit can be carried in one hand thanks to a convenient, molded handle on top.

The built-in mixer on MIXPACK Express has five input channels with 16 Alesis DSP presets with 24-bit effects for Hall, Room, Vocal, Plate, Stereo Delay, Reverb + Delay and Reverb + Chorus combinations. Fine tune the performance with the integrated 7-band graphic EQ and monitor all of it with the built-in LED and Monitor Out jack.

If you need a solid PA system that is loaded with features and easy to transport, grab a MIXPACK Express. If you need a little more power, check out the MIXPACK and MIXPACK Pro, also from Alto Professional.

Features

• 350 Watts of continuous power
• Lightweight, one-piece design for convenient transport
• Two 10" speakers with cables included
• Built-in mixer with seven-band graphic EQ and XLR, line and RCA inputs
• Integrated Alesis DSP with 24-bit effects including reverb, delay and chorus

Specifications

Mixer Section:

• Microphone/Line Input: Electronically balanced, discrele input configuration
• Frequency Response: 10Hz to 55kHz, +/-3dBu
• Microphone Input Impedance: 3.9k Ohms
• Line Input Impedance: 10k Ohms
• Microphone Input S/N ratio: ≥94dBu
• Microphone Inputs: Balanced XLR connectors
• Line Inputs: Balanced / Unbalanced, 1/4' (6.3mm) TRS jack connedctors
• Tape Inputs: Unbalanced RCA jack
• Inputs Distortion: ( THD & N) 0.04 at 0dBu, 1KHz
• Channel EQ: High shelving + / -15dB @12KHz; Low shelving + / -15dB @80Hz
• Aux Send: 1 with paths for DSP internal section, external DSP section and Monitor Out
• DSP Section: 24-bit HALL, ROOM, VOCAL, PLATE, STEREO DELAY, REV + DELAY and REV + CHORUS combinations
• Master Section: Master Level knob, 4 LEDs level meter, 7-band graphic output EQ, and DSP Return level
• Output Master: EQ 7-band, +/-15dB@ 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz, 16kHz
• Monitor Section: Master Level knob, 4 LEDs level meter, and 1/4" (6.3mm.) MONITOR OUT jack

Speaker Section:

• System Type: 2-way Coax Vented box
• Frequency Response: 65Hz-20kHz at -10dB
• Spherical horn Coverage: 70° H x 70° V
• Continuous Power: 150Watt AES Standard
• Peak Power: 300Watt Peak
• Protection: Electronic circuit on driver
• Speaker Specification: 10" (254mm) Low Frequency Driver / 2" (50.8mm) Voice Coil, 1" (25.4mm) Neodymium High
• Input Connectors: 1/4" (6.3mm.) mono (TS) jack on each cabinet

Amplifier Section:

• Output Power: 350W (EIAJ)
• Impedance: 4 Ohms
• Protections: Overload/Short Circuit/ Soft Clip Limiter/ Thermal Protection Fan Cooling

Standard Package:

• 2 speaker cables
• 1 power cord
• 2 microphone cables
• Stands: F-8 or F-3 are not included